[NSRCA-discussion] Hatch Latch

[J N Hiller]

Right the spring seams weaker that it should be. I like it because I install
it through a bulkhead. Now you have me worried. Maybe I should just go back
to making my own.
Jim

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Verne Koester
Sent: Sunday, January 10, 2010 12:00 PM
To: 'General pattern discussion'
Subject: Re: [NSRCA-discussion] Hatch Latch

I used to use the 8066 until I had a canopy that kept coming off in flight.
The spring tension is too low and under the right vibration, airframe
torque, or whatever, the latch will disengage because of the low spring
tension. I replaced the 8066 with the red one and have been using them ever
since. I used the 8066 on a number of planes before that happened without a
problem. I prefer not to chance it now that I know.

Verne

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of J N Hiller
Sent: Saturday, January 09, 2010 8:05 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] Hatch Latch

I've like the Graupner # GR8066. I get mine from the local hobby shop but
Hobby Lobby has them.
http://search.hobby-lobby.com/psearch/svc/search.php?uid=1&q=latch
<http://search.hobby-lobby.com/psearch/svc/search.php?uid=1&q=latch>
Attached is a drawing I made.
Jim Hiller


-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Ron Hansen
Sent: Saturday, January 09, 2010 12:08 PM
To: nsrca-discussion at lists.nsrca.org
Subject: [NSRCA-discussion] Hatch Latch

Can anyone recommend a spring loaded hatch latch that will work on a 1/8"
thich fuse side to hold on my canopy?

Thanks
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20100110/b07397d8/attachment.html>