[NSRCA-discussion] Cline Regulator for Sale?

[Jay Marshall]

I used the Perry pump on a 1.20 setup where the fuel tank was placed way
back over the CG.

I used the bypass return setup.

I set the engine w/o the pump on the stand, then connected the pump and
adjusted the pump pressure setting so that the engine ran the same.

Flew great.

 

Jay Marshall 

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Pascoe,Tim
[Burlington]
Sent: Wednesday, February 17, 2010 2:08 PM
To: General pattern discussion
Subject: [NSRCA-discussion] Cline Regulator for Sale?

 

I have the Perry pump I recently asked about. But I'd also like to try the
setup with a Cline regulator. Anyone have one in good shape they want to
part with? I suspect the Cline may be easier to set up in the long run. Iron
Bay is no longer in operation, correct?

 

Tim Pascoe 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20100217/f21e2d03/attachment.html>