[NSRCA-discussion] Looking for a how-to article

[J N Hiller]

Thanks all, this all sounds like more effort than I'm willing to expend. I
guess I will continue to use iron-on-paint.
Jim

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Dave Burton
Sent: Sunday, December 05, 2010 11:52 AM
To: 'General pattern discussion'
Subject: Re: [NSRCA-discussion] Looking for a how-to article

I've used about all the combinations of glass cloth, polyester resin, epoxy
resin, K&B clear, urethane furniture finish, nitrate dope, silkspan, silk
cloth, silray, etc. over the years. I think the easiest, lightest, and
safest is silkspan and nitrate dope with talcum powder mixed in the dope as
a filler on the latter coats. I usually wait a week or so after the last
coat of dope to apply primer and epoxy paint to allow the dope solvents to
gas out.
Dave

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Verne Koester
Sent: Sunday, December 05, 2010 2:41 PM
To: 'General pattern discussion'
Subject: Re: [NSRCA-discussion] Looking for a how-to article

I seem to remember him using K&B Superpoxy clear (no longer made). I'm
pretty sure Don's method would be lighter yet.

Verne

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[ mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of J N Hiller
Sent: Sunday, December 05, 2010 12:05 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] Looking for a how-to article

Thanks. As I remember Roy applied the cloth with a paint product rather than
epoxy as part of the finishing process.
I will certainly check out the DVD. I expect it has many things of interest.
Jim


-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[ mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Verne Koester
Sent: Sunday, December 05, 2010 7:48 AM
To: 'General pattern discussion'
Subject: Re: [NSRCA-discussion] Looking for a how-to article

Jim,
It's not quite the article you're looking for, but Don Ramsey has an
excellent DVD on applying a lightweight painted finish to wings. I vaguely
remember the Speights article and I think Don's methods are similar, if not
identical. They involve lightweight 3/4 oz (or less) glass cloth and thinned
epoxy. I can't imagine a lighter method for a painted wing. If that's what
you have in mind, I'd suggest you pick up a copy of Don's DVD. I think
they're available on his Barnstormer web site.

Hope this helps

Verne Koester

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[ mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of J N Hiller
Sent: Saturday, December 04, 2010 11:45 PM
To: NSRCA Mailing List
Subject: [NSRCA-discussion] Looking for a how-to article

Help, here is a memory check for you long time members.
Quite some years ago Roy Speights wrote an article on how to apply a
lightweight painted finish to wings. I would like a copy of the article but
don't know where to start looking. It may have been in the K-Factor during
his vice presidency in 1989 & 90 but I no longer have those issues.
Thanks
Jim


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
  _____

No virus found in this message.
Checked by AVG - www.avg.com <http://www.avg.com>
Version: 10.0.1170 / Virus Database: 426/3298 - Release Date: 12/05/10
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20101206/b87df38a/attachment.html>