[NSRCA-discussion] YS 1.20AC Help

[John Gayer]

The timing mark on the prop driver aligns with casting mark on top of 
crankcase and the dot on the cam gear aligns with the bottom bolt hole 
for the cam gear cover or straight down.
John

On 8/22/2010 10:15 PM, Ken Velez wrote:
>
> Hi Guys,
>
> I'm in the middle of re-building one of this for a friend and I can't 
> find the manual for it. I just need to know where to set the timing 
> marks for the crankshaft (bottom center of case???) and for the cam 
> shaft (top screw on the cam cover???). For some reason I believe it's 
> different than the 1.20FZ or the 1.40L, maybe not.
>
> TIA
>
> Ken
>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20100823/84211ada/attachment.html>