[NSRCA-discussion] Pushrod suggestions
rcmaster199 at aol.com
rcmaster199 at aol.com
Sun Apr 25 08:24:57 AKDT 2010
Anthony,
You might consider pull-pull if the elevator can be set-up for it. You
will save the most weight with such a set-up
Matt
-----Original Message-----
From: Ed Alt <ed_alt at hotmail.com>
To: nsrca-discussion at lists.nsrca.org
Sent: Sun, Apr 25, 2010 9:22 am
Subject: Re: [NSRCA-discussion] Pushrod suggestions
I think you should consider landing it first, as this will make things
considerably easier.
Probably the easiest system is the Lockhart pushrod setup. I've got
pictures...
Ed
From: Anthony Romano
Sent: Sunday, April 25, 2010 10:20 AM
To: nsrca-discussion at lists.nsrca.org
Subject: [NSRCA-discussion] Pushrod suggestions
Hi All,
I want to remove the servos from the tail of an already flying plane
to move the cg forward. Thought I had a DEPS kit in stock but it was
used in another project.
Please share your pushrod ideas, especially since this plane has a
tail stiffener that will make installing the DEPS quite difficult.
Pictures, links, etc would be greatly appreciated.
Anthony
The New Busy is not the old busy. Search, chat and e-mail from your
inbox. Get started.
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
More information about the NSRCA-discussion
mailing list