[NSRCA-discussion] JR long gimbal stick

Troy Newman troy at troynewman.net
Tue Sep 29 14:00:31 AKDT 2009


Ihncheol,

As I stated if the stick says its fits the 12X it will fit all the others , the 9303 or 10X or 8103 and so on

This one fits the 12X, 9303, 10X, 8103, and so on all the way back to much older radios.

http://www.horizonhobby.com/Products/Default.aspx?ProdID=JRPA146



It’s the same thread as the other radios.........



By contrast

This one will work on all the others and if slightly modified will also fit the 12X

http://www.horizonhobby.com/Products/Default.aspx?ProdID=JRPA045

This is the stick I and using on my 12X right now.


I don't think the really long and fat ones here
http://www.horizonhobby.com/Products/Default.aspx?ProdID=JRPA047

I don't know if these work on the 12x but they do on the older radios. I don't use them because they are too large of diameter and length for me. So I can't tell you how to change them......



Bottom line if you are using on a 9303 ANY of the sticks you buy from JR will work. That means all of the JR stick options will work on the 9303

I hope this clears the confusion for you.....



Troy Newman


-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Ihncheol Park
Sent: Tuesday, September 29, 2009 2:20 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] JR long gimbal stick

Troy,

Thank you for the explanation.  By super long, which one are you talking about?

I was trying to see if the JRPA146 (gimbal stick ends: 12x Long) fits on the 9303 so that I can start using the dubro tray this winter.

http://www.horizonhobby.com/Products/Default.aspx?ProdID=JRPA146


I do have JRPA047 which is also a long one (about 10mm longer than JRPA045 34mm/red and comes with longer thraded stick), but don't want to pull the threaded stick out of the gimbals to make it long enough.  I also have no idea how to put in the threaded stick to the gimbal.

Ihncheol
--- On Tue, 9/29/09, Troy Newman <troy at troynewman.net> wrote:

> From: Troy Newman <troy at troynewman.net>
> Subject: Re: [NSRCA-discussion] JR long gimbal stick
> To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
> Date: Tuesday, September 29, 2009, 1:02 PM
>
> 
> Actually the thread in the sticks is
> identical on the 12X as the
> 9303 and 10X they are the same internal
> diameter. 
> 
>    
> 
> The problem is the 12X gimbal  was changed
> and the threaded
> length is not as long as the older style gimbal. On the 12X
> the stick have
> threads the entire length. The older style sticks have
> about 3/8” of non
> threaded portion then the threads start inside the stick. 
> If you try and use
> the Long Red JR sticks the 34mm ones they will not screw on
> the 12X gimbal
> because the threads do not contact. 
> 
>    
> 
> What you can do and I have done it on my
> 12X is cut about 1/8”
> off the bottom of the aluminum stick. Then it will thread
> on and work just
> fine. The length is then about the same as when used on the
> 9303 or 10X. The
> only problem is they will not thread go shorted as they
> will bottom out on the
> gimbal. 
> 
>    
> 
> The newer octagon shaped 12X stick both the
> ones that comes on
> the TX stock and the newer long and short versions will
> work just fine on all
> the 9303’s and 10X’s out there. These have the threads
> all the way down on the
> inside of the stick. It’s the same thread and will work.
> You can actually make them
> longer than the older style because the threads go all the
> way down. 
> 
>    
> 
> I have been flying the older style red 34mm
> sticks since the 12X
> came out. Just a little modification and they work great.
> There is a short straight
> diameter section right at the bottom of the aluminum
> stick…Remove this constant
> diameter part and the older style sticks will thread right
> on. The other
> versions of the JR sticks that are colored and all will
> work also on the 12X
> they are the same thread.  
> 
>    
> 
> The only ones that are a problem are the
> super long ones that
> have the larger diameter. 
> 
>    
> 
> Hope this answers the confusion.
> 
> 
> I can post up a photo if needed.
> 
> 
>    
> 
>    
> 
> Troy Newman 
> 
> Team JR/Horizon Hobby 
> 
>    
> 
> 
> 
> 
> 
> From:
> nsrca-discussion-bounces at lists.nsrca.org
> [mailto:nsrca-discussion-bounces at lists.nsrca.org] On
> Behalf Of jzeigenfus at comcast.net
> 
> Sent: Tuesday, September 29, 2009 5:17 AM
> 
> To: pnahobbies at sbcglobal.net; General pattern
> discussion
> 
> Subject: Re: [NSRCA-discussion] JR long gimbal
> stick 
> 
> 
> 
> 
> 
>    
> 
> 
> 
> I
> am using the long gimbals for the 12x. they are the same
> length as the ones for
> a 9303 but are a different diameter for connecting to the
> TX. You cannot mix a
> match the two types of gimbals for the TX's. JEZ
> 
> 
> 
> 
> 
> ----- Original Message -----
> 
> From: "Ihncheol Park"
> <pnahobbies at sbcglobal.net>
> 
> To: "General pattern discussion"
> <nsrca-discussion at lists.nsrca.org>
> 
> Sent: Tuesday, September 29, 2009 1:09:41 AM GMT -05:00
> US/Canada Eastern
> 
> Subject: [NSRCA-discussion] JR long gimbal stick
> 
> 
> 
> 
> 
>  
> 
> Does anyone know how long is the JRPA146
> long gimbal stick for
> JR 12X? 
> 
> Does 12X has different diameter for gimbal
> stick? 
> 
> Trying to figure out if it fits on
> 9303.   
> 
>   
> 
> Thanks, 
> 
>   
> 
> Ihncheol 
> 
> 
> 
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> 
> 
> 
> 
> 
> 
>  
> 
> 
> 
> -----Inline Attachment Follows-----
> 
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


More information about the NSRCA-discussion mailing list