[NSRCA-discussion] glassing a fuse

[michael s harrison]

I will be there too.  I have done layups for years. 

Mike

 

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of W. Eddie
Batchelor
Sent: Tuesday, October 20, 2009 10:48 AM
To: 'General pattern discussion'
Subject: Re: [NSRCA-discussion] glassing a fuse

 

John

That is sorta my thought. 

My question now is could the pigment help locate voids & hollows and thus
decrease the need for primer coats and block sanding, or is that wishful
thinking :-)

 

Verne, since I'm not doing a full glass lay-up I'm not really concerned with
weakening the glass, after all most people thin the resin quite a lot first
which weakens it also. I had the impression at the thickness used in this
method it's mostly a solid base for the paint?

 

This is all thinking out loud before I try me first attempt, so I appreciate
the responses.

 

Eddie

 

  _____  

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of John Gayer
Sent: Tuesday, October 20, 2009 1:56 AM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] glassing a fuse

 

Using pigment can help identify where the resin is too thick and needs to be
removed.

John Gayer

Eddie Batchelor P.D. wrote: 

I am about to glass my 1st fuse.  I;ve read all the threads on how to's but
I have question I've not seen covered by anyone.

 

Looking at laminating epoxys I see pigment available. in my past I
fiberglassed an old wooden boat and added pigment to the resin BUT I had no
clue how to properly apply glass/resin and didn't care about weight. I
learned a lot about what NOT to do.

 

I have not seen any reference by anone to using pigment in their resin when
glassing a plane.  Why not.

is it weight  or lack of ability to see the wood underneath for finish
sanding or something altogether different thaht I haven't thought of.

 

Just curious.

 

eddie batchelor

 

 

 
 
 



  _____  



 
 
 
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20091020/0c2566f9/attachment.html>