[NSRCA-discussion] basic judging question

[Don Ramsey]

The picture of the hourglass was in the Judging Manual at one time.  Don is
correct as are you that the only line through center is the downline with
the 2 of 4.
 
 
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of James Oddino
Sent: Thursday, October 08, 2009 8:26 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] basic judging question
 
Then the judge must know how much of the 1/4 loop must be before center and
how much after.  I submit that none know unless they have computed the
answer beforehand.  And even if they knew the answer it would be impossible
to judge accurately.  And I guess that first 1/4 loop establishes the radii
of all the corners.  Let's face it judging is subjective.
 
Jim O
 
 
 
On Oct 8, 2009, at 5:27 PM, AtwoodDon at aol.com wrote:



Your assumption is correct.  You must pull slightly before reaching center
on the inbound side and push slightly before center on exit to make the 2 45
degree uplines match.  You only cross 'center' on the downline in the knife
edge portion of the 2 of 4.
 
Don
 
In a message dated 10/8/2009 5:17:20 P.M. Pacific Daylight Time,
joddino at socal.rr.com writes:

Anyone got a drawing of the center of an Hour Glass?  I'm assuming the  
plane only goes through it once.

Jim
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
 
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.421 / Virus Database: 270.14.7/2422 - Release Date: 10/08/09
18:33:00
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20091009/a8518b0f/attachment.html>