[NSRCA-discussion] basic judging question

[AtwoodDon at aol.com]

Your assumption is correct.  You must pull slightly before reaching  center 
on the inbound side and push slightly before center on exit to make the 2  
45 degree uplines match.  You only cross 'center' on the downline in the  
knife edge portion of the 2 of 4.
 
Don
 
 
In a message dated 10/8/2009 5:17:20 P.M. Pacific Daylight Time,  
joddino at socal.rr.com writes:


Anyone got a drawing of the center of an Hour Glass?  I'm  assuming the  
plane only goes through it  once.

Jim
_______________________________________________
NSRCA-discussion  mailing  list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20091009/379a9f42/attachment.html>