[NSRCA-discussion] Wing adjuster tube

[brian young]

Another way, I've used 1/8 light ply with a hole sized right for the pin then CA soaked. Works fine, bearing area seems adequate for the pin as it doesnt wear.

Brian




________________________________
From: "LCREELER at aol.com" <LCREELER at aol.com>
To: nsrca-discussion at lists.nsrca.org
Sent: Tue, November 10, 2009 8:08:19 AM
Subject: [NSRCA-discussion] Wing adjuster tube

Need wing adjuster tubes. Have adjusters need wing side tube.
Thanks 
Mike


      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20091110/2669736a/attachment.html>