[NSRCA-discussion] Wing adjuster tube

[patterndude at tx.rr.com]

Amazing how the adjusters outlast their first plane.  I make my own in less than 5 min. Find a CF rod of the right diameter or a bit smaller. The 3/16 work well. Roll a half inch strip of waxed paper around it then sprial wrap some seam tape, wetting each layer with thin CA. 3 or 4 passes is all you need. If you make a length of 2 inches you can sand the ends flat then bisect it to make a pair. 

Lance 
Sent via BlackBerry by AT&T

-----Original Message-----
From: LCREELER at aol.com
Date: Tue, 10 Nov 2009 09:08:19 
To: <nsrca-discussion at lists.nsrca.org>
Subject: [NSRCA-discussion] Wing adjuster tube

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion