[NSRCA-discussion] Fataba 14 MZ

[Earl Haury]

I use a simple Velcro strap, about 6" long,  added to the TX strap (through the plastic "adjustment loop" & taped). A small Velcro sticky back pad is affixed to the bottom of the TX case. Unobtrusive & easy to use.

Earl
  ----- Original Message ----- 
  From: Derek Koopowitz 
  To: General pattern discussion 
  Sent: Monday, November 02, 2009 1:10 PM
  Subject: Re: [NSRCA-discussion] Fataba 14 MZ


  Verne,

  I did not use the device that was shown in the link - I used a similar device starting early this year and after about 5 months of use I picked up my TX to clip the TX strap onto the device and the entire device pulled the TX clip attachment and bolt from the TX case.  Any device which changes the angle of attachment will put a strain on the TX attachment clip and I am sure that it will fail at some point.

  I had to have a brand new face plate put on my 14MZ... thanks to Hobbico for getting it done quickly.

  -Derek


  On Mon, Nov 2, 2009 at 10:58 AM, <verne at twmi.rr.com> wrote:

    Hi Mike,
    Sounds like your warning is coming from experience. Care to elaborate? I've been using mine for over a season without a problem, but it would be handy to know what to avoid if there's a problem.

    Thanks!
    Verne


    ---- Dr Mike <drmikedds at sbcglobal.net> wrote:

    =============
    Be careful in using it.  It will break your tx casing if abused.

    mike



    From: nsrca-discussion-bounces at lists.nsrca.org
    [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Verne Koester
    Sent: Sunday, November 01, 2009 7:19 PM
    To: 'General pattern discussion'
    Subject: Re: [NSRCA-discussion] Fataba 14 MZ



    Hi Jerry,

    Here's the link for what you need, I've been using it for over a year and it
    works great - perfect balance.



    http://www.helicopterjohn.com/



    Verne



    From: nsrca-discussion-bounces at lists.nsrca.org
    [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Gerald
    Gallagher
    Sent: Sunday, November 01, 2009 7:32 PM
    To: 'General pattern discussion'
    Subject: [NSRCA-discussion] Fataba 14 MZ



     Has anyone made or found  a manufactured devise that will fit on the Fataba
    14 MZ that will improve the balance, (CG) better when using the 2.4 antenna?

     Thanks



    Jerry Gallagher
    _______________________________________________
    NSRCA-discussion mailing list
    NSRCA-discussion at lists.nsrca.org
    http://lists.nsrca.org/mailman/listinfo/nsrca-discussion





------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20091102/16ba8844/attachment.html>