[NSRCA-discussion] MK Tail wheel

[Richard Strickland]

I saw a new one on RCU a few nights ago (I think..)

RS
 


Date: Thu, 28 May 2009 09:41:59 -0700
From: d_bodary at yahoo.com
To: nsrca-discussion at lists.nsrca.org
Subject: Re: [NSRCA-discussion] MK Tail wheel






I had one come off a couple of weeks ago. I used a sullivan wheel. had to solder two washers on it to hold it. 
 
On another note. Is Central still offering ES 2-stroke pipes. I no longer see them on the website.
Thanks
Dennis

--- On Thu, 5/28/09, Anthony Abdullah <aabdu at sbcglobal.net> wrote:


From: Anthony Abdullah <aabdu at sbcglobal.net>
Subject: Re: [NSRCA-discussion] MK Tail wheel
To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
Date: Thursday, May 28, 2009, 11:36 AM






Duh! That makes more sense. I thought he lost the tire, but he lost the wheel, OK. We need to get together and teach Mark how to land 

--- On Wed, 5/27/09, Archie Stafford <astafford at swtexas.net> wrote:


From: Archie Stafford <astafford at swtexas.net>
Subject: Re: [NSRCA-discussion] MK Tail wheel
To: "'General pattern discussion'" <nsrca-discussion at lists.nsrca.org>
Date: Wednesday, May 27, 2009, 3:46 PM






The o-ring is easy to find, but Mark lost the entire wheel..not just the o-ring.  I had the same problem about 3 weeks ago.  
 


Arch 
  

From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Anthony Abdullah
Sent: Wednesday, May 27, 2009 2:37 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] MK Tail wheel

  





Mark,


That wheel looks like a glorified O-ring, it might be worth your time to see if a .25 cent O-ring would work. 

--- On Wed, 5/27/09, Atwood, Mark <atwoodm at paragon-inc.com> wrote:



From: Atwood, Mark <atwoodm at paragon-inc.com>
Subject: Re: [NSRCA-discussion] MK Tail wheel
To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
Date: Wednesday, May 27, 2009, 2:41 PM 


Awesome!  Thanks!

  
I looked on their web site (since that’s where I bought the assembly) but didn’t find just the wheel. 

  
Thanks Again…  I love this list. 
  
-Mark 
  


From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Rex
Sent: Wednesday, May 27, 2009 2:39 PM
To: NSRCA-discussion
Subject: Re: [NSRCA-discussion] MK Tail wheel

  
Central's catalog has them on page 25...  MKD0581H...  $5.49
 
Rex
  



From: atwoodm at paragon-inc.com
To: nsrca-discussion at lists.nsrca.org
Date: Wed, 27 May 2009 14:28:27 -0400
Subject: [NSRCA-discussion] MK Tail wheel 

Does MK make (and does anyone sell) a replacement tail wheel for their light plastic tail wheel assembly?  I hate to replace the whole thing just because the wheel came off.  It’s a very thin wheel so the small Dubro’s don’t work.   Suggestions?

  
-Mark 

No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.339 / Virus Database: 270.12.40/2135 - Release Date: 05/26/09 08:53:00


-----Inline Attachment Follows----- 

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

 
-----Inline Attachment Follows-----


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-----Inline Attachment Follows-----


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_________________________________________________________________
Insert movie times and more without leaving Hotmail®.
http://windowslive.com/Tutorial/Hotmail/QuickAdd?ocid=TXT_TAGLM_WL_HM_Tutorial_QuickAdd1_052009
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20090528/9a1f05c6/attachment.html>