[NSRCA-discussion] MK Tail wheel
Dennis Bodary
d_bodary at yahoo.com
Thu May 28 08:42:02 AKDT 2009
I had one come off a couple of weeks ago. I used a sullivan wheel. had to solder two washers on it to hold it.
On another note. Is Central still offering ES 2-stroke pipes. I no longer see them on the website.
Thanks
Dennis
--- On Thu, 5/28/09, Anthony Abdullah <aabdu at sbcglobal.net> wrote:
From: Anthony Abdullah <aabdu at sbcglobal.net>
Subject: Re: [NSRCA-discussion] MK Tail wheel
To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
Date: Thursday, May 28, 2009, 11:36 AM
Duh! That makes more sense. I thought he lost the tire, but he lost the wheel, OK. We need to get together and teach Mark how to land
--- On Wed, 5/27/09, Archie Stafford <astafford at swtexas.net> wrote:
From: Archie Stafford <astafford at swtexas.net>
Subject: Re: [NSRCA-discussion] MK Tail wheel
To: "'General pattern discussion'" <nsrca-discussion at lists.nsrca.org>
Date: Wednesday, May 27, 2009, 3:46 PM
The o-ring is easy to find, but Mark lost the entire wheel..not just the o-ring. I had the same problem about 3 weeks ago.
Arch
From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Anthony Abdullah
Sent: Wednesday, May 27, 2009 2:37 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] MK Tail wheel
Mark,
That wheel looks like a glorified O-ring, it might be worth your time to see if a .25 cent O-ring would work.
--- On Wed, 5/27/09, Atwood, Mark <atwoodm at paragon-inc.com> wrote:
From: Atwood, Mark <atwoodm at paragon-inc.com>
Subject: Re: [NSRCA-discussion] MK Tail wheel
To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
Date: Wednesday, May 27, 2009, 2:41 PM
Awesome! Thanks!
I looked on their web site (since that’s where I bought the assembly) but didn’t find just the wheel.
Thanks Again… I love this list.
-Mark
From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Rex
Sent: Wednesday, May 27, 2009 2:39 PM
To: NSRCA-discussion
Subject: Re: [NSRCA-discussion] MK Tail wheel
Central's catalog has them on page 25... MKD0581H... $5.49
Rex
From: atwoodm at paragon-inc.com
To: nsrca-discussion at lists.nsrca.org
Date: Wed, 27 May 2009 14:28:27 -0400
Subject: [NSRCA-discussion] MK Tail wheel
Does MK make (and does anyone sell) a replacement tail wheel for their light plastic tail wheel assembly? I hate to replace the whole thing just because the wheel came off. It’s a very thin wheel so the small Dubro’s don’t work. Suggestions?
-Mark
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.339 / Virus Database: 270.12.40/2135 - Release Date: 05/26/09 08:53:00
-----Inline Attachment Follows-----
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-----Inline Attachment Follows-----
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-----Inline Attachment Follows-----
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20090528/19260c43/attachment.html>
More information about the NSRCA-discussion
mailing list