[NSRCA-discussion] Castle Phoenix 85HV help

[Jay Marshall]

I had a similar problem where mine would start to rev, then cutoff. Castle
to me to use the soft cutoff and it cured the problem.

 

Jay Marshall 

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Ihncheol Park
Sent: Thursday, May 21, 2009 1:32 PM
To: General pattern discussion
Subject: [NSRCA-discussion] Castle Phoenix 85HV help

 

Well, no luck on electric power setup?

 

I am using 85HV on Fliton Inspire 90 with E-Flite Power 110, 2 x TP
4S5000mAh packs for 8S.

 

Radio is JR X9303.  With auto-calibration for Throttle setting.  The ESC
doesn't get to full throttle with stick all the way up for more than 4
seconds specified in the manual.

 

ESC firm ware version is 1.55 right now.  There are several Beta versions,
but haven't tried one yet.

 

Is there some kind of incompatiblity between the 2.4Ghz & Castle?

 

Ihncheol

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20090521/6974fe07/attachment.html>