[NSRCA-discussion] JR DSM glitch - trouble-shooting.

[glmiller3 at suddenlink.net]

I had a similar problem with an 88 inch Yak.  Variable extreme yaw and roll changes as the covering scooped air... Resolved with a heat iron and a strip of reinforcing trim to double seal the edge.

G
Sent from my BlackBerry® wireless device

-----Original Message-----
From: "Bill Glaze" <billglaze at bellsouth.net>

Date: Wed, 6 May 2009 14:14:29 
To: General pattern discussion<nsrca-discussion at lists.nsrca.org>
Subject: Re: [NSRCA-discussion] JR DSM glitch - trouble-shooting.


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion