[NSRCA-discussion] Futaba 12 FG question
John Fuqua
johnfuqua at embarqmail.com
Tue May 5 17:57:37 AKDT 2009
Both Ron and I are using Jaccio regulators so that's probably not it. I
will admit my rx's are all at least a year old and that seems to be a
possibility based on the comments.
-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Archie
Stafford
Sent: Tuesday, May 05, 2009 8:49 PM
To: 'General pattern discussion'
Subject: Re: [NSRCA-discussion] Futaba 12 FG question
I noticed this when I was running different brand regulators. My planes did
this when I was flying duralite regulators. It even happens on a friends
airplane as well as the airplane he bought from me. My Tech Aero regulators
do it as well. However the plane I have with Jaccio stuff doesn't. I have
no explanation as to why, just something I have discovered.
Arch
-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Ron Van Putte
Sent: Tuesday, May 05, 2009 7:13 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] Futaba 12 FG question
I hope someone can help John out. It's really bugging him. When he
told me what his system is doing, I responded that my system's
response is instantaneous. He didn't believe me and bet a beer that
my system was as slow as his. He lost the beer and I think that PO'd
him as much as anything.
Ron
On May 5, 2009, at 7:04 PM, John Fuqua wrote:
> I have an interesting and perplexing thing going on with my 12 FGA
> Futaba 2.4ghz transmitter that is not duplicated by others here
> locally. I thought I would throw it out to the list and see if
> anyone else has noticed this anomaly.
>
>
>
> When I turn on my 12FGA 2.4 TX it takes all my 2.4 ghz receivers (7
> ch, 8 ch, 14 ch) about 1 or 2 seconds before any control surfaces
> neutralize. With Ron Van Putte's 12 FGA 2.4 and his 14 ch rx it
> is instantaneous. We checked a 14MZ 2.4 tx with an 8 ch Rx and it
> is about the same as Ron's.
>
>
>
> Has anyone else using the 12 FGA noticed this. This does not seem
> to affect performance but I am puzzled why I see this time
> differential to neutralize.
>
>
>
> John
>
>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
More information about the NSRCA-discussion
mailing list