[NSRCA-discussion] Futaba 12 FG question

[Archie Stafford]

The delay with the Duralite stuff is much longer than with the Tech Aero
stuff.  This is both with the 617 and 608 receivers.  I haven't flown the
tech aero stuff in my 40% stuff.  One those with a 6014 I have the smart fly
setup and it has a slight delay, similar to the tech aero stuff.  But the
duralite setup has a noticeable delay.

Arch


-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Archie
Stafford
Sent: Tuesday, May 05, 2009 8:49 PM
To: 'General pattern discussion'
Subject: Re: [NSRCA-discussion] Futaba 12 FG question

I noticed this when I was running different brand regulators.  My planes did
this when I was flying duralite regulators.  It even happens on a friends
airplane as well as the airplane he bought from me.  My Tech Aero regulators
do it as well.  However the plane I have with Jaccio stuff doesn't.  I have
no explanation as to why, just something I have discovered.

Arch


-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Ron Van Putte
Sent: Tuesday, May 05, 2009 7:13 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] Futaba 12 FG question

I hope someone can help John out.  It's really bugging him.  When he  
told me what his system is doing, I responded that my system's  
response is instantaneous.  He didn't believe me and bet a beer that  
my system was as slow as his.  He lost the beer and I think that PO'd  
him as much as anything.

Ron

On May 5, 2009, at 7:04 PM, John Fuqua wrote:

> I have an interesting and perplexing thing going on with my 12 FGA  
> Futaba 2.4ghz transmitter that is not duplicated by others here  
> locally.  I thought I would throw it out to the list and see if  
> anyone else has noticed this anomaly.
>
>
>
> When I turn on my 12FGA 2.4 TX it takes all my 2.4 ghz receivers (7  
> ch, 8 ch, 14 ch) about 1 or 2 seconds before any control surfaces  
> neutralize.   With Ron Van Putte's 12 FGA 2.4 and his 14 ch rx it  
> is instantaneous.  We checked a 14MZ 2.4 tx with an 8 ch Rx and it  
> is about the same as Ron's.
>
>
>
> Has anyone else using the 12 FGA noticed this.  This does not seem  
> to affect performance but I am puzzled why I see this time  
> differential to neutralize.
>
>
>
> John
>
>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion