[NSRCA-discussion] Trottle cut, knife edge mix on Futaba 7 ch

[colin chariandy]

Use ch1 and ch7 instead of ch1 and ch6 and turn on the "differential" mix.
 
The 7uap does not have a throtle cut mix so you'l have to set one up using a throtle to throttle mixer.
 
Colin

--- On Sun, 5/3/09, Xavier Mouraux <xaviermouraux at yahoo.com> wrote:


From: Xavier Mouraux <xaviermouraux at yahoo.com>
Subject: [NSRCA-discussion] Trottle cut, knife edge mix on Futaba 7 ch
To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
Received: Sunday, May 3, 2009, 7:11 AM



Hi,

I am helping a friend setting up is plane and I can't found how to create a mix to cut the trottle (for electric). The radio is a 7UA or something like that.

Also, the aileron have 2 servos, the flaperon function is activated but when we program a mix Rudder to Aileron, only one aileron moves. How come ? Do we need 2 mixes ?

Thanks in advance

Xavier


      __________________________________________________________________
Looking for the perfect gift? Give the gift of Flickr! 

http://www.flickr.com/gift/
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion



      __________________________________________________________________
The new Internet Explorer® 8 - Faster, safer, easier.  Optimized for Yahoo!  Get it Now for Free! at http://downloads.yahoo.com/ca/internetexplorer/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20090503/70f9cdfb/attachment.html>