[NSRCA-discussion] JR9303 Throttle cut/hold in airplane softwarefor e-power

[Jay Marshall]

Use an MPI safety plug to insure that everything is ready before the prop
turns.

 

Jay Marshall 

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Ihncheol Park
Sent: Friday, March 20, 2009 12:31 PM
To: General pattern discussion
Subject: [NSRCA-discussion] JR9303 Throttle cut/hold in airplane softwarefor
e-power

 

Ok.  I have a question to all those who fly E-power.

I've been flying a little of e-powered planes, but mostly foamy and small
ones.

Now going with 90 size before starting 2m.

 

Is there any way to set throttle cut/hold in Airplane software for entire
range of the throttle?

I've mixed throttle to throttle on a switch to 0 in all 5 point.  It works
on idle, but not if I move the throttle stick more than 1/4 throttle.  Motor
still turns. 

 

Am I missing something?

 

I don't want that 19 + inch props turn without my approval!

 

Thanks,

 

Ihncheol

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20090322/97992044/attachment.html>