[NSRCA-discussion] Servos suggestions for a 90 size pattern plane

[Tommy Scarmardo]

The 3421sa's are great little servos, I have two on elevator on my new ship, but you
should be careful where you use them. The motor is stronger than the nylon gear
train and is easily stripped under certain conditions. The gears are tiny.
 
tommy s

--- On Fri, 6/12/09, mike mueller <mups1953 at yahoo.com> wrote:


From: mike mueller <mups1953 at yahoo.com>
Subject: Re: [NSRCA-discussion] Servos suggestions for a 90 size pattern plane
To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
Date: Friday, June 12, 2009, 7:47 AM



How about JR 3421SA on everything but the rudder which would work well with a JR 8321. Mike

--- On Fri, 6/12/09, Dean & Melissa Williams <DMWILLIAMS at bigpond.com> wrote:

> From: Dean & Melissa Williams <DMWILLIAMS at bigpond.com>
> Subject: [NSRCA-discussion] Servos suggestions for a 90 size pattern plane
> To: nsrca-discussion at lists.nsrca.org
> Date: Friday, June 12, 2009, 7:40 AM
> 
> 
>  
>  
> 
> 
>  
> Hi
> Which servos (brand and #)
> would you use for a 90 
> size pattern plane like the ESM Adrenaline 90 and which
> ones on what surfaces 
> ?
> Thanking you for your
> sugestions
>                                               
> 
> Dean (Outback OZ) 
> 
> -----Inline Attachment Follows-----
> 
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


      
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20090612/8699ad56/attachment.html>