[NSRCA-discussion] Arming plug manufacturer and source?

[mike mueller]

 I agree that the 5.5mm are the best but the 6mm bullets are about half the weight. Since weight means so much it becomes an important factor. Unless you fly the 2 designs out there that have no problem making weight but that's a whole can of whoop a----- that I don't want to rehash over and over again. I'm going to try Chad's 4MM idea next.
 Plus the 5.5MM's are pricy. M2

--- On Thu, 6/11/09, Verne Koester <verne at twmi.rr.com> wrote:

> From: Verne Koester <verne at twmi.rr.com>
> Subject: Re: [NSRCA-discussion] Arming plug manufacturer and source?
> To: "'General pattern discussion'" <nsrca-discussion at lists.nsrca.org>
> Date: Thursday, June 11, 2009, 1:59 PM
> I switched to 5.5 mm bullets last
> year and like them a lot. They hold up to
> the arcing a lot better than the Deans because the spark
> hits right on the
> end of the bullet which isn't where the electrical
> connection is made. The
> Deans connectors I ran the year before that were in pretty
> bad shape from
> the arcing.
> 
> Verne
> 
> -----Original Message-----
> From: nsrca-discussion-bounces at lists.nsrca.org
> [mailto:nsrca-discussion-bounces at lists.nsrca.org]
> On Behalf Of mike mueller
> Sent: Thursday, June 11, 2009 11:18 AM
> To: General pattern discussion
> Subject: Re: [NSRCA-discussion] Arming plug manufacturer
> and source?
> 
> 
>  Anthony I think a lot of guys are getting away from the
> deans style
> connectors. I know I've just switched everything over to
> 6MM connectors.
> Anyone have any thoughts on that? Mike
> 
> --- On Thu, 6/11/09, Anthony Abdullah <aabdu at sbcglobal.net>
> wrote:
> 
> > From: Anthony Abdullah <aabdu at sbcglobal.net>
> > Subject: [NSRCA-discussion] Arming plug manufacturer
> and source?
> > To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
> > Date: Thursday, June 11, 2009, 10:10 AM
> > I
> > bought an electric arming assembly in Toldeo and I
> find
> > myself in need of another, does anyone know who makes
> it and
> > where I can get it? It is basically a set of wires
> where one
> > end goes to the ESC and the other to the battery with
> a
> > mount to the inside of the fuselage. To arm the plane
> you
> > insert the plug.
> >  
> > Thanks
> > Anthony
> > 
> > 
> > -----Inline Attachment Follows-----
> > 
> > _______________________________________________
> > NSRCA-discussion mailing list
> > NSRCA-discussion at lists.nsrca.org
> > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> 
> 
>       
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> 
> 
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>