[NSRCA-discussion] Iota 55 amp fuse replacement & surge protector

[steve hannah]

Hi Incheol,

The fuse is easy to replace, but you have to loosen the screw on the
fuseholder.  If you look at the fuseholder you will see where to access the
screw.  Make sure the power cord is unplugged :-)


On Mon, Jun 1, 2009 at 12:43 PM, Ihncheol Park <pnahobbies at sbcglobal.net>wrote:

>  I have a couple of questions to those using Iota power supply
>
>
>
> Has anyone replaced the fuse(s) on the Iota power supply?  I can’t pull
> them out at all.  Do I have to disassemble it?
>
>
>
> Every time when I plug the power supply to the wall outlet, it sparks
> causing the breaker to reset.
>
> So, I’ve been using a surge protector, but today.  The surge protector died
> with a spark.
>
>
>
> Any suggestions for the surge protector?
>
>
>
> Thanks,
>
>
>
> Ihncheol
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20090601/d8d6b2aa/attachment.html>