[NSRCA-discussion] Adjustment of YS high speed needle valve

[adriancwong at earthlink.net]

No set rule. After peak, just back off a few clicks will be fine.

-----Original Message-----
>From: Paul Horan <paul.horan at sbcglobal.net>
>Sent: Jan 21, 2009 9:52 PM
>To: General pattern discussion <nsrca-discussion at lists.nsrca.org>
>Subject: [NSRCA-discussion] Adjustment of YS high speed needle valve
>
>   Adjusting the HS needle on a YS 140 L,  I usually peak it and back off 300 rpm.  The instructions say to peak it and back off about 1/8 to 1/4 turn.  Any advise ?
> 
>Thanks,
>Paul