[NSRCA-discussion] BOLLY out of business

[Richard Strickland]

Yep.

To: nsrca-discussion at lists.nsrca.orgFrom: gfowler at raytheon.comDate: Fri, 16 Jan 2009 11:20:03 -0600Subject: Re: [NSRCA-discussion] BOLLY out of businessSo the answer is cosmetics right?Gray FowlerSenior Principal Chemical EngineerRadomes and Specialty AperturesTechnical Staff Composites EngineeringRaytheon 



Richard Strickland <pamrich47 at hotmail.com> Sent by: nsrca-discussion-bounces at lists.nsrca.org 
01/16/2009 11:17 AM 




Please respond toGeneral pattern discussion <nsrca-discussion at lists.nsrca.org>





To
General pattern discussion <nsrca-discussion at lists.nsrca.org> 


cc



Subject
Re: [NSRCA-discussion] BOLLY out of business




The long straight legs look very good on all the airplanes I've installed them on--particularly with the pants that were made for them.  I think just a little sweep would look a little better--that's all.  NOT like the sweep on the original straight legged, but swept, Bollys--but those DO look good on the shorter gear.  The amount of sweep I think I'm envisioning is about the same that it would appear to make the gear legs perpendicular to horizontal as the airplane sits.  I do not care much for the looks of the longer, curved, Bolly gear.  All the standard  pants seem too large and butt ugly.  I like them pointier, slimmer, and more elegant.RS

To: nsrca-discussion at lists.nsrca.orgFrom: gfowler at raytheon.comDate: Fri, 16 Jan 2009 10:37:14 -0600Subject: Re: [NSRCA-discussion] BOLLY out of businessWhy do you prefer sweep?Gray FowlerSenior Principal Chemical EngineerRadomes and Specialty AperturesTechnical Staff Composites EngineeringRaytheon 



Richard Strickland <pamrich47 at hotmail.com> Sent by: nsrca-discussion-bounces at lists.nsrca.org 01/15/2009 05:17 PM 




Please respond toGeneral pattern discussion <nsrca-discussion at lists.nsrca.org>





To
General pattern discussion <nsrca-discussion at lists.nsrca.org> 


cc



Subject
Re: [NSRCA-discussion] BOLLY out of business




If I were to complain about anything on Matt's gear (I'm not) I would prefer a little sweep which would preclude 'a one side fits both" arrangement.  How are most of you guys mounting them--two or three bolts? I've been using three 4-40s but just bought one and the former owner had two per side.RS

To: nsrca-discussion at lists.nsrca.orgFrom: gfowler at raytheon.comDate: Thu, 15 Jan 2009 16:56:48 -0600Subject: Re: [NSRCA-discussion] BOLLY out of businessAnthony What did you think about the ES gear twist? That is the wheel going toe in- toe out hitting small bumps. ES had nothing but zero degree fibers. That is the one design issue I am conteplating at the moment. Also considering that all new planes are widebody that is what needs to be addressed..BUT having a 1 continuous gear will be more weight. I am thinking it is better to split the gear for a weight savings.  If we make two pieces, and either piece can be a left or a right, then a broken gear is only on one side. Any advantage to that?Gray FowlerSenior Principal Chemical EngineerRadomes and Specialty AperturesTechnical Staff Composites EngineeringRaytheon 



Anthony Romano <anthonyr105 at hotmail.com> Sent by: nsrca-discussion-bounces at lists.nsrca.org 01/15/2009 04:18 PM 




Please respond toGeneral pattern discussion <nsrca-discussion at lists.nsrca.org>





To
<nsrca-discussion at lists.nsrca.org> 


cc



Subject
Re: [NSRCA-discussion] BOLLY out of business




Graph Tech is not for us. I am sure their stuff is well suited for the IMAC style planes that they are designed for but too heavy and way too stiff for our use. I went through their website and picked a gear based on dimension of the ES. 2+ ounces heavier and twice as thick with zero flex. Broke the gear out of my Black Magic many times when hitting small holes in the runway. Rick donated his ES gear and life has been much better. Anthony

From: jlachow at hotmail.comTo: nsrca-discussion at lists.nsrca.orgDate: Thu, 15 Jan 2009 15:59:26 -0500Subject: Re: [NSRCA-discussion] BOLLY out of businessAnyone have any luck with the Graph Tech RC stuff?  Only experience was with some smaller electrics that worked just fine. They have carbon pants and spinners, as well.

From: tony at radiosouthrc.comTo: nsrca-discussion at lists.nsrca.orgDate: Thu, 15 Jan 2009 15:00:23 -0500Subject: Re: [NSRCA-discussion] BOLLY out of businessThanks, Jim.  Those are $112.00 I think… about double that of the Bolly…. Not sure how that will go….. but if there are no other choices… Tony Stillman, President Radio South, Inc. 139 Altama Connector, Box 322 Brunswick, GA  31525 1-800-962-7802 www.radiosouthrc.com 


From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Woodward, Jim (US SSA)Sent: Thursday, January 15, 2009 2:52 PMTo: General pattern discussionSubject: Re: [NSRCA-discussion] BOLLY out of business Tony, Luiz at Net Box Hobby carrys the CA carbon gear. Thanks, Jim From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of TonySent: Thursday, January 15, 2009 2:36 PMTo: 'General pattern discussion'Subject: [NSRCA-discussion] BOLLY out of business I just received conformation that BOLLY has gone out of business.  Unfortunately, this is a major supplier of CF landing gear and wheel pants.  I have been awaiting a shipment of several items, and now it does not look like that will happen.  I am working now to determine if there are any gear/wheel pants available.   The really bad thing is that I am not sure what options we have left, other than going with a kit/arf manufacturer’s gear.  Ed Skorpa dropped his gear last year… Tony Stillman, President Radio South, Inc. 139 Altama Connector, Box 322 Brunswick, GA  31525 1-800-962-7802 www.radiosouthrc.com  

Windows Live™ Hotmail®: Chat. Store. Share. Do more with mail. See how it works.

Windows Live™ Hotmail®: Chat. Store. Share. Do more with mail. See how it works._______________________________________________NSRCA-discussion mailing listNSRCA-discussion at lists.nsrca.orghttp://lists.nsrca.org/mailman/listinfo/nsrca-discussion 

Windows Live™: Keep your life in sync. Check it out._______________________________________________NSRCA-discussion mailing listNSRCA-discussion at lists.nsrca.orghttp://lists.nsrca.org/mailman/listinfo/nsrca-discussion 

Windows Live™: Keep your life in sync. Check it out._______________________________________________NSRCA-discussion mailing listNSRCA-discussion at lists.nsrca.orghttp://lists.nsrca.org/mailman/listinfo/nsrca-discussion 
_________________________________________________________________
Windows Live™ Hotmail®: Chat. Store. Share. Do more with mail. 
http://windowslive.com/howitworks?ocid=TXT_TAGLM_WL_t1_hm_justgotbetter_howitworks_012009
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20090116/e9afb04c/attachment.html>