[NSRCA-discussion] Radio South Pro Drivers now available with DELAY

[Tony]

Mark:
What we would normally install is the delay circuit and a reset switch.  I
just checked and the reset switch is included in the $18.50 cost, HOWEVER,
we have not found a small enough switch to put in the MK3 unit for the
reset.  It is not a problem on the MK2.  

 

The reset switch would basically cut the main power to the unit, allowing it
to reset so you can start over.  So the procedure would be that if the
engine didn't start for some reason, you would set the electric starter
down, then press the reset button.  When you are ready to try again, press
the start button, spin up the engine with the starter, and it will ignite in
about 4 seconds.

 

 

Tony Stillman, President

Radio South, Inc.

139 Altama Connector, Box 322

Brunswick, GA  31525

1-800-962-7802

www.radiosouthrc.com

  _____  

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Atwood, Mark
Sent: Friday, February 27, 2009 4:15 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] Radio South Pro Drivers now availablewith
DELAY

 

Excellent on all counts.  Personally I think that's about perfect.  Will it
reset if it's pushed again?

 

The problem I'll run into is hitting the switch (I currently just hit the
button after spinning the prop..not the safest) and go.  But if the engine
pops.and then quits, I need to wait a full minute for the glow to die before
I can try again.  Being able to rehit the button and get a new 4 sec delay
would be ideal (for me).

 

 

 

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Tony
Sent: Friday, February 27, 2009 4:01 PM
To: 'General pattern discussion'
Subject: Re: [NSRCA-discussion] Radio South Pro Drivers now available with
DELAY

 

We have been playing with 3-5 seconds.  What we have settled on is 4
seconds. This is not adjustable, however, we are open to suggestions if you
think the time is too long or too short.  We can even make it a custom time
for an individual.  

In the MK2 version (orange box) we can also install a switch so that you can
turn off the delay if you like.  That will cost a little more, but if it is
a feature customers want, we can provide it.  

 

Tony Stillman, President

Radio South, Inc.

139 Altama Connector, Box 322

Brunswick, GA  31525

1-800-962-7802

www.radiosouthrc.com

  _____  

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Atwood, Mark
Sent: Friday, February 27, 2009 3:45 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] Radio South Pro Drivers now available with
DELAY

 

Awesome Tony,

 

How long is the delay?  Adjustable?  Reset-able?

 

-Mark

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Tony
Sent: Friday, February 27, 2009 3:25 PM
To: 'General pattern discussion'
Subject: [NSRCA-discussion] Radio South Pro Drivers now available with DELAY

 

Just wanted to let everyone know that the long wait is over.  At the
Southeastern Model Show, we will be introducing  the Pro Driver Mk2 and Mk3
units, now available with a DELAY.  We have designed this circuit so that it
can be retro-fit into your existing unit, or you can purchase a new unit
with the delay already built in.  

 

If you would like us to update your current Pro Driver MK2 or MK3, the
charge is $18.50, which includes return shipping via USPS Priority Mail.  

If you want to send in your unit for this update, please ship it to:

 

Emerald Coast Circuits

107 South Ave.

Ft. Walton Beach, FL 32547

 

Please include a note with your information and a check, money order, or
credit card number for the charges.

 

 

 

 

Tony Stillman, President

Radio South, Inc.

139 Altama Connector, Box 322

Brunswick, GA  31525

1-800-962-7802

www.radiosouthrc.com

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20090227/36a065dc/attachment.html>