[NSRCA-discussion] Receiver packs

Richard Strickland pamrich47 at hotmail.com
Fri Feb 13 17:01:05 AKST 2009


Jerry, I think the short answer is no.  But there has been much discussion regarding dual packs for back-up.  An example ot single pack usage is using a 2 cell lipo at around 780-800ma for practice and 340-380ma for contests to make weight.  These are used with voltage regulators with variing outputs.

RS
 
> From: jjvoth at mtelco.net
> To: nsrca-discussion at lists.nsrca.org
> Date: Fri, 13 Feb 2009 17:32:25 -0600
> Subject: Re: [NSRCA-discussion] Receiver packs
> 
> Sorry, I said that wrong. I meant are two packs needed to power the flight 
> pack.
> ----- Original Message ----- 
> From: "Jerry Voth" <jjvoth at mtelco.net>
> To: "NSRCA" <nsrca-discussion at lists.nsrca.org>
> Sent: Friday, February 13, 2009 5:23 PM
> Subject: [NSRCA-discussion] Receiver packs
> 
> 
> > This has probably come up many times but I'd like to know if it's 
> > necessary
> > to use two Li-Fe packs for the radio and servos
> > _______________________________________________
> > NSRCA-discussion mailing list
> > NSRCA-discussion at lists.nsrca.org
> > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> >
> 
> 
> --------------------------------------------------------------------------------
> 
> 
> 
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.0.237 / Virus Database: 270.10.23/1951 - Release Date: 02/13/09 
> 06:51:00
> 
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_________________________________________________________________
See how Windows connects the people, information, and fun that are part of your life.
http://clk.atdmt.com/MRT/go/msnnkwxp1020093175mrt/direct/01/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20090214/022f9851/attachment.html>


More information about the NSRCA-discussion mailing list