[NSRCA-discussion] Receiver packs

[krishlan fitzsimmons]

If you can get a 10 cell pack that is fine. Problem being if one cell goes bad, you have a somewhat useless 10 cell. 

Chris          

--- On Fri, 2/13/09, Jerry Voth <jjvoth at mtelco.net> wrote:
From: Jerry Voth <jjvoth at mtelco.net>
Subject: Re: [NSRCA-discussion] Receiver packs
To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
Date: Friday, February 13, 2009, 3:32 PM

Sorry, I said that wrong. I meant are two packs needed to power the flight pack.
----- Original Message ----- From: "Jerry Voth"
<jjvoth at mtelco.net>
To: "NSRCA" <nsrca-discussion at lists.nsrca.org>
Sent: Friday, February 13, 2009 5:23 PM
Subject: [NSRCA-discussion] Receiver packs


> This has probably come up many times but I'd like to know if it's
necessary
> to use two Li-Fe packs for the radio and servos
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> 


--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.0.237 / Virus Database: 270.10.23/1951 - Release Date: 02/13/09
06:51:00

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20090214/455197b1/attachment.html>