[NSRCA-discussion] Header Coupling

[Duane Beck]

http://www.mcmaster.com/nav/enter.asp?partnum=8547K15 



The above part number 8547K15 is sold cut-to-length, by the foot. 



Duane 


----- Original Message ----- 
From: "Ron Van Putte" <vanputte at cox.net> 
To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org> 
Sent: Thursday, February 5, 2009 12:47:55 PM GMT -05:00 US/Canada Eastern 
Subject: Re: [NSRCA-discussion] Header Coupling 

I use Teflon purchased from McMaster-Carr.  They have PTFE (high   
temp) tubing in various IDs, including 3/4".  You have to purchase it   
in at least 5 foot lengths.  I cut it in one foot lengths and sell   
what I won't need for a while. 

Ron VP 

On Feb 5, 2009, at 11:23 AM, Jay Marshall wrote: 

> I need some vinyl(?) tubing from an OS140 header to a Bolly pipe.   
> The ID should be ¾”. Any suggestions for a source/part no.? 
> 
> 
> Jay Marshall 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20090205/19775817/attachment.html>