[NSRCA-discussion] Servo Selection - JR 821's or 4131's

[Dave]

821.

 

Regards,


Dave

 

  _____  

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Mark McLeod
Sent: Tuesday, December 22, 2009 11:45 AM
To: 'General pattern discussion'
Subject: Re: [NSRCA-discussion] Servo Selection - JR 821's or 4131's

 

I meant to say 4721 for the rudder.

 

  _____  

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Mark McLeod
Sent: Tuesday, December 22, 2009 11:44 AM
To: nsrca-discussion at lists.nsrca.org
Subject: [NSRCA-discussion] Servo Selection - JR 821's or 4131's

 

I'm fixing up an old Desire and don't want to invest in new servos at this
time. I have sitting new in the box, both JR 4131's and 821's. So, I'm
wondering what people's thoughts are about using old technology 4131's for
the ailerons and elevator or new, value digital 821's? I have a 4721 for the
elevator. There is enough room to mount the deeper 821's, so that isn't an
issue.

 

Thanks,

Mark

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20091222/48c809f9/attachment.html>