[NSRCA-discussion] Futaba R6106 HF/HFC Comments?

[Andrew Jesky]

Ron,

I have used both quite a bunch from foamy planes to 57" 3d planes. I  
havnt put the mid range receiver in a pattern plane but from flying it  
in the bigger plane I think it could work.

Andrew Jesky



On Dec 1, 2009, at 9:24 PM, "Ron Van Putte" <vanputte at cox.net> wrote:

> I noticed that Futaba has two new 2.4 GHz receivers on the market,
> the R6106HF and R6106HFC.  The R6106HF is for Park Flyers and the
> R6106HFC is for midrange, bigger airplanes.  Both are much lighter
> than the R617 (about half the weight).  Any comments out there
> regarding either one?
>
> Ron
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion