[NSRCA-discussion] Digital Pug-In module

[Jay Marshall]

Can't speak to JR, but the plug-in 2.4 module on my Futaba 9C has worked
fine. The only problem is that if you use a tray it will probably have to be
modified.

 

Jay Marshall 

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Bill Glaze
Sent: Tuesday, August 25, 2009 10:32 AM
To: General pattern discussion
Subject: [NSRCA-discussion] Digital Pug-In module

 

All: 

I bought from a pattern fllyer, a JR 9393 Transmitter and receiver on 72
megs, with a frequency synthesizer,  While I do prefer to fly on 6 meters, I
thought I might use this transmitter with a 6 meter synthesizer.

However, a good friend of mine suggested getting a conversion unit and go
directly to 2.4 Gig.  I know that it's  definitely the coming thing, even
though I've been satisfied with the older system.

However, (and this is where my doubt comes in) I was told by a hobby shop
owner, that he "doesn't trust the 2.4 module, because, it's a basically a
converter, and because the entire system wasn't designed to be used at 2.4
Gig to begin with, he doubts the plug-in module's reliability or safety of
flight."  

Any advice will be appreciated.

 

Bill Glaze

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20090825/78b06ae1/attachment.html>