[NSRCA-discussion] Fwd: OS 140RX Need Help

[Snaproll4 at aol.com]

____________________________________
 From: Snaproll4
To: cjm767driver at hotmail.com
Sent: 8/8/2009 10:32:35  P.M. Eastern Daylight Time
Subj: Re: [NSRCA-discussion] OS 140RX Need  Help


Larry,
 
        Replacing the main bearing is  so easy you might as well do it.  If 
it's a used plane that you have no  history with, the bearing could be the 
cause.  It is the only maintenance  necessary on this motor.  If the pump 
still has the paint seal on it,  don't screw with it.
 
Steve
 
 
In a message dated 8/8/2009 10:06:04 P.M. Eastern Daylight Time,  
cjm767driver at hotmail.com writes:

HS needle is at  about 1-3/4 out leaned from about 2 turns out. I don’t 
know the pump  settings. 
This is a used  engine already installed in a  plane…


 
____________________________________



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20090809/fb389d70/attachment.html>