[NSRCA-discussion] Trim Change

[Wayne Galligan]

I have experienced this when replacing a gimbal.  Like Tony said if the pot is not centered properly there will be a trim change when switching rates.

Wayne Galligan

----- Original Message ----- 
  From: Bill's Email 
  To: General pattern discussion 
  Sent: Thursday, August 06, 2009 2:13 PM
  Subject: Re: [NSRCA-discussion] Trim Change


  Tony wrote: 
    Trim change with dual rates in not necessarily a bad pot.  It could be a good pot that has slipped.  This is very common.  Futaba even went to metal straps to help stop this.  Pots that are bad usually have dirty control, or a tight shaft.  



  I guess I should rephrase my comment to be more accurate. Trim changes are an indication of a problem with the pots. They may be bad or have slipped. Either way it is a sign that a trip to the transmitter doctor is in order.





------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20090807/2f3fa3e1/attachment.html>