[NSRCA-discussion] What is enough rudder servo torque

[colin chariandy]

I had a feeling you were going to say that...
 
Thanks.

--- On Tue, 8/4/09, Chad Northeast <chadnortheast at shaw.ca> wrote:


From: Chad Northeast <chadnortheast at shaw.ca>
Subject: Re: [NSRCA-discussion] What is enough rudder servo torque
To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
Received: Tuesday, August 4, 2009, 11:08 PM


In my opinion its not, myself and probably others ( I know Jason does) use the 9156, which is around 350 in-oz at 6V.  I would put at least 200-250 on.

Chad

----- Original Message -----
From: colin chariandy <cchariandy at yahoo.ca>
Date: Tuesday, August 4, 2009 8:23 pm
Subject: [NSRCA-discussion] What is enough rudder servo torque
To: NSRCA Mailing List <nsrca-discussion at lists.nsrca.org>

> After a year of neglect I started (trying) to fly F again. Since 
> then I moved the CG fwd quite a bit and now the KE loop seems to 
> take quite a bit of rudder deflection and more throttle than I recall.
>  
> I'm using S9151 at 6V in an Integral. 
>  
> Is that enough servo? 
>  
> Colin
> 
> 
>       
> __________________________________________________________________Looking for the perfect gift? Give the gift of Flickr! 
> 
> http://www.flickr.com/gift/ 
-----Inline Attachment Follows-----


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


      __________________________________________________________________
Get a sneak peak at messages with a handy reading pane with All new Yahoo! Mail: http://ca.promos.yahoo.com/newmail/overview2/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20090805/221288ef/attachment.html>