[NSRCA-discussion] Pro Driver's w/reset and delay

[Tony]

The Pro Driver's w/delay have been finalized and will be shipping this week!
We demoed them at the Toledo Show and everyone seemed happy with them.  I
will be updating the Radio South website later today/tonight with pictures
and more info.  When you press the start button, the unit will delay about
4-5 seconds, then ramp-up the glow plug.  This will be a little easier on
the plug as well.  If your engine does not start, there is a reset switch
installed (small red switch) to terminate the operation and allow you to fix
the problem with the engine, then begin the start process over.  

 

We can retro-fit your Pro Driver MK2 or MK3 for $18.00 + shipping.  The
units will need to go back to the Ft. Walton Beach, FL address for this mod.
Check the website later for more info and pics.

 

www.radiosouthrc.com <http://www.radiosouthrc.com/> 

   

 

Tony Stillman, President

Radio South, Inc.

139 Altama Connector, Box 322

Brunswick, GA  31525

1-800-962-7802

www.radiosouthrc.com

  _____  

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Pete Cosky
Sent: Monday, April 06, 2009 1:02 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] Pro Driver's w/reset and delay

 

Is this what you are looking for Richard?

----- Original Message ----- 

From: Tony <mailto:tony at radiosouthrc.com>  

To: 'General pattern discussion' <mailto:nsrca-discussion at lists.nsrca.org>  

Sent: Monday, March 30, 2009 2:59 PM

Subject: Re: [NSRCA-discussion] Pro Driver's w/reset and delay

 

Mark:
Yes.  It will be $18 for the upgrade for either the Mark II (Orange box w/
push button) or Mark III (Yellow box).  The units will need to be sent to
our manufacturer in Ft. Walton Beach for this work.  
The address is:
Emerald Coast Circuits

107 South Ave.

Ft. Walton Beach, FL 32547

 

 

Tony Stillman, President

Radio South, Inc.

139 Altama Connector, Box 322

Brunswick, GA  31525

1-800-962-7802

www.radiosouthrc.com


  _____  


From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Atwood, Mark
Sent: Monday, March 30, 2009 2:55 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] Pro Driver's w/reset and delay

 

Awesome!  Look forward to seeing you at the show.  

 

Is it still possible to get an older (either orange or yellow) pro Driver
upgraded?  If so, how much? 

 

-Mark

 

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Tony
Sent: Monday, March 30, 2009 2:52 PM
To: 'General pattern discussion'
Subject: [NSRCA-discussion] Pro Driver's w/reset and delay

 

Just wanted to let everyone know that we have made a change in our Pro
Drivers w/Delay.  We have added the reset button to them as a standard
feature.  The unit has a 5 second delay after you press the "start" button.
The current then ramps up to the plug, which is easier on the glow plug and
will increase life of the plug.  The unit then runs for 30 seconds and then
shuts off.  At any point in this cycle, you can disrupt it by pressing the
"reset" button.  This cancels the operation and brings the unit back to a
ready state to begin the cycle new.  

This will allow for an engine that does not start right away.  You can press
the "reset" button to terminate the glow to the plug and then correct any
issue with the engine.  Then you can begin the process over again for
another try for start.

 

These changes took a few more days to implement, and our units will be
shipping out right after the Toledo Show this weekend.  We will have some
units at the show as well.  

 

Thanks for everyone's suggestions on how to improve our product!  We believe
that it will be worth the wait.

 

 

Tony Stillman, President

Radio South, Inc.

139 Altama Connector, Box 322

Brunswick, GA  31525

1-800-962-7802

www.radiosouthrc.com

 


  _____  


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20090406/049c375e/attachment.html>