[NSRCA-discussion] Pro Driver's w/reset and delay

[Pete Cosky]

Is this what you are looking for Richard?
  ----- Original Message ----- 
  From: Tony 
  To: 'General pattern discussion' 
  Sent: Monday, March 30, 2009 2:59 PM
  Subject: Re: [NSRCA-discussion] Pro Driver's w/reset and delay


  Mark:
  Yes.  It will be $18 for the upgrade for either the Mark II (Orange box w/ push button) or Mark III (Yellow box).  The units will need to be sent to our manufacturer in Ft. Walton Beach for this work.  
  The address is:
  Emerald Coast Circuits

  107 South Ave.

  Ft. Walton Beach, FL 32547

   

   

  Tony Stillman, President

  Radio South, Inc.

  139 Altama Connector, Box 322

  Brunswick, GA  31525

  1-800-962-7802

  www.radiosouthrc.com


------------------------------------------------------------------------------

  From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Atwood, Mark
  Sent: Monday, March 30, 2009 2:55 PM
  To: General pattern discussion
  Subject: Re: [NSRCA-discussion] Pro Driver's w/reset and delay

   

  Awesome!  Look forward to seeing you at the show.  

   

  Is it still possible to get an older (either orange or yellow) pro Driver upgraded?  If so, how much? 

   

  -Mark

   

  From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Tony
  Sent: Monday, March 30, 2009 2:52 PM
  To: 'General pattern discussion'
  Subject: [NSRCA-discussion] Pro Driver's w/reset and delay

   

  Just wanted to let everyone know that we have made a change in our Pro Drivers w/Delay.  We have added the reset button to them as a standard feature.  The unit has a 5 second delay after you press the "start" button.  The current then ramps up to the plug, which is easier on the glow plug and will increase life of the plug.  The unit then runs for 30 seconds and then shuts off.  At any point in this cycle, you can disrupt it by pressing the "reset" button.  This cancels the operation and brings the unit back to a ready state to begin the cycle new.  

  This will allow for an engine that does not start right away.  You can press the "reset" button to terminate the glow to the plug and then correct any issue with the engine.  Then you can begin the process over again for another try for start.

   

  These changes took a few more days to implement, and our units will be shipping out right after the Toledo Show this weekend.  We will have some units at the show as well.  

   

  Thanks for everyone's suggestions on how to improve our product!  We believe that it will be worth the wait.

   

   

  Tony Stillman, President

  Radio South, Inc.

  139 Altama Connector, Box 322

  Brunswick, GA  31525

  1-800-962-7802

  www.radiosouthrc.com

   



------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20090406/e801a5fc/attachment.html>