[NSRCA-discussion] JR 9303 mode 2 to mode 4

Xavier Mouraux xaviermouraux at yahoo.com
Fri Apr 3 06:39:39 AKDT 2009


Thanks Troy. I will forward the info to my friend.
Xavier


--- On Fri, 4/3/09, Troy Newman <troy at troynewman.net> wrote:

> From: Troy Newman <troy at troynewman.net>
> Subject: Re: [NSRCA-discussion] JR 9303 mode 2 to mode 4
> To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
> Date: Friday, April 3, 2009, 6:35 AM
> Xavier,
> 
> Just got word from the manager at Horizon/JR Service
> Center.
> 
> Yes they can do the work. The radio would lose its
> programming, but you
> can back that up to another 9303 or even the new PC
> interface that JR
> has. I have used the program on my radios and its pretty
> cool. You can
> put the program into the PC change it, email it, do just
> about whatever
> you want then load it back into the radio....
> 
> Sorry off track. Because they have to re-initialize the CPU
> in the radio
> the programming will be gone.
> 
> The cost for this modification is around $30 at the most.
> Heli's are a
> little more work and it might be up to about $45. 
> 
> 
> I hope this answers it for you....
> 
> Oh a MODE1 and MODE2 radios can buddy box no problem so it
> should work
> just fine.
> 
> 
> Troy Newman
> 
> -----Original Message-----
> From: nsrca-discussion-bounces at lists.nsrca.org
> [mailto:nsrca-discussion-bounces at lists.nsrca.org]
> On Behalf Of Xavier
> Mouraux
> Sent: Wednesday, April 01, 2009 5:12 PM
> To: General pattern discussion
> Subject: [NSRCA-discussion] JR 9303 mode 2 to mode 4
> 
> 
> Hello guys, 
> 
> A friend is looking at buying that radio but also at
> changing to mode 4
> (aileron and throttle on the left stick). Is it possible to
> change the
> mode 2 9303 into a mode 4 using the programming other than
> swapping the
> servos in the receiver ? I looked in the 9303 manual on
> line and I don't
> found it. I think it's something feasible on the 12X and
> the 14MZ. Radio
> South could modify a 10X for about 70$ so I suppose they
> could do the
> same on the 9303 but doing it with programing would be
> better, specially
> on a new radio still under warranty.
> 
> Thank you
> 
> Xavier
> 
> 
>       
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> 


      


More information about the NSRCA-discussion mailing list