[NSRCA-discussion] JR 10X conversion to LiPo

[vicenterc at comcast.net]

Please replace pilits with pilots.  I went too fast.

--
Vicente "Vince" Bortone

-------------- Original message -------------- 
From: vicenterc at comcast.net 

Jerry,

Are you using regulator?  It looks like JR does not like the high voltage.  Probably, I am going to try to call or e-mail JR to ask.  I wonder if there is a difference between the 2.4 modules and the old modules in regard taking higher voltage.  New TX are designed to work with LiPo.  Just wondering.

JR sponsored pilits.  Can you find out?

Thanks for all responding.

--
Vicente "Vince" Bortone

-------------- Original message -------------- 
From: Budd Engineering <jerry at buddengineering.com> 

> Yep, and I couldn't be happier. 
> 
> True R/C 2500 mAh LiPo's, $30 each, fits inside the 10X battery holder 
> with a minor amount of trimming with the Dremel tool. I bought one 
> set to try, liked it so well I bought another and converted the spare 
> battery pack. That way I can charge them out of the transmitter (not 
> that it matters, the charge rate is so low that the risk of a mishap 
> is about the same as with NiCads or NiMh). 
> 
> I screwed around with a couple sets of NiMH's for the past several 
> years, they were a total waste of time, the self discharge rate got to 
> where I had to re-charge them if I didn't fly within a day or so of 
> the previous charge 
> 
> The LiPo 's pea k up at 12.5 V, essentially the same voltage as a good 
> set of NiCads, and discharge almost linearly, so it's easy to assess 
> their state of discharge. 
> 
> http://home.comcast.net/~truerc/ready_pack/ready_packs.htm 
> 
> Thx, Jerry 
> 
> Budd Engineering 
> jerry at buddengineering.com 
> http://www.buddengineering.com 
> 
> On Sep 22, 2008, at 8:56 AM, vicenterc at comcast.net wrote: 
> 
> > Has anyone done the conversion? 
> > 
> > Thanks, 
> > 
> > -- 
> > Vicente "Vince" Bortone 
> > _______________________________________________ 
> > NSRCA-discussion mailing list 
> > NSRCA-discussion at lists.nsrca.org 
> > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion 
> 
> _______________________________________________ 
> NSRCA-discussion mailing list 
> NSRCA-discussion at lists.nsrca.org 
& gt; http://lists.nsrca.org/mailman/listinfo/nsrca-discussion 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080923/42c7d356/attachment.html>
-------------- next part --------------
An embedded message was scrubbed...
From: vicenterc at comcast.net
Subject: Re: [NSRCA-discussion] JR 10X conversion to LiPo
Date: Tue, 23 Sep 2008 10:37:01 +0000
Size: 768
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080923/42c7d356/attachment.mht>