[NSRCA-discussion] Silicone/RTV chatter

[JShulman]

Thanks Jay. I'll pick some up on my way back from the field.

Regards,
Jason
www.jasonshulman.com 
www.shulmanaviation.com
www.composite-arf.com


-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Jay Marshall
Sent: Saturday, September 20, 2008 1:35 PM
To: 'General pattern discussion'
Subject: Re: [NSRCA-discussion] Silicone/RTV chatter


Yep. The type used for electrical (metal wires, etc.) has a different curing
agent which won't corrode the metal it comes in contact. HD may carry both -
I don't know. I used to use it extensively in electronics. We also had a big
expensive product recall before we found out the difference - a year later.

Jay Marshall

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of JShulman
Sent: Saturday, September 20, 2008 12:14 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] Silicone/RTV chatter

Jay,

Is there a difference between electrical silicone and regular silicone (Home
Depot)? It will be on metal connectors.

Regards,
Jason
www.jasonshulman.com 
www.shulmanaviation.com
www.composite-arf.com


-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Jay Marshall
Sent: Saturday, September 20, 2008 12:06 PM
To: 'General pattern discussion'
Subject: Re: [NSRCA-discussion] Silicone/RTV chatter


If the wires are insulated then either would be OK. If there is ANY metal
contact then get an electrical silicone (no acid) from Radio Shack.

Jay Marshall

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of JShulman
Sent: Saturday, September 20, 2008 11:40 AM
To: NSRCA
Subject: [NSRCA-discussion] Silicone/RTV chatter

There was a quick discussion about this a couple weeks ago, but I wasn't
paying attention. If I wanted to keep some wires separated
from one another, what would I use... clear silicone or RTV?

Regards,
Jason
www.jasonshulman.com
www.shulmanaviation.com
www.composite-arf.com

No virus found in this outgoing message.
Checked by AVG.
Version: 7.5.524 / Virus Database: 270.7.0/1682 - Release Date: 9/20/2008
10:24 AM


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

No virus found in this incoming message.
Checked by AVG. 
Version: 7.5.524 / Virus Database: 270.7.0/1682 - Release Date: 9/20/2008
10:24 AM

No virus found in this outgoing message.
Checked by AVG. 
Version: 7.5.524 / Virus Database: 270.7.0/1682 - Release Date: 9/20/2008
10:24 AM


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
No virus found in this incoming message.
Checked by AVG. 
Version: 7.5.524 / Virus Database: 270.7.0/1682 - Release Date: 9/20/2008 10:24 AM

No virus found in this outgoing message.
Checked by AVG. 
Version: 7.5.524 / Virus Database: 270.7.0/1682 - Release Date: 9/20/2008 10:24 AM