[NSRCA-discussion] Test

[Rex]

Well, I know exactly what you mean...  I found my "Black" battery pretty easy...  a few years back,
I lost the receiver battery connection and watched my 9 flight Impact, "IMPACT" the ground at 
about a 45 degree angle...  the battery was easy to find, it was in the hole in the ground right in 
front of the big hole in the front of the plane!  LOL
 
Rex



ect: Re: [NSRCA-discussion] Test


You won that bet.  Brian at Tanic has replaced a few cells here and there and on non Tanic stuff he still puts on a nice white wrapper with a "NOT TANIC" label.  The one ejected on the 45 degree inverted neg snap was one of FMAs earlier units that was still hanging in with--you already guessed it--a nice black shrink-wrapped cover.... RS



From: trexlesh at msn.comTo: nsrca-discussion at lists.nsrca.orgDate: Thu, 2 Oct 2008 15:31:09 -0700Subject: Re: [NSRCA-discussion] Test

I'm betting that the battery is black in color too?!!!!  They should be some fluorescent color! Rex



a.orgDate: Thu, 2 Oct 2008 16:32:18 -0500Subject: Re: [NSRCA-discussion] Test

Still looking for one of mine and a 5S1P battery out in the woods....Another hard (read expensive) lesson learned... RS



From: trexlesh at msn.comTo: nsrca-discussion at lists.nsrca.orgDate: Thu, 2 Oct 2008 11:31:16 -0700Subject: Re: [NSRCA-discussion] Test

LOL  Ya, I learned a valuable lesson from the whole ordeal...  It only took a week to find the canopy.After I got it home, I realized that the latch pin didn't fit the mating hole very good at all, and the pin wasn't going all the way forward.  Once I fixed both of those issues, the canopy actually stays on.  Imagine that! Rex



From: patternpilot at verizon.netTo: nsrca-discussion at lists.nsrca.orgDate: Thu, 2 Oct 2008 13:42:09 -0400Subject: Re: [NSRCA-discussion] Test







A couple of ounces could be lost if you could just get rid of the duct tape that’s holding on that pesky canopy. J
 
Den  
 




From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of RexSent: Thursday, October 02, 2008 1:17 PMTo: General pattern discussionSubject: Re: [NSRCA-discussion] Test
 
No jim...  I'm not working...  Waiting for a contract for the next job.  Ya, it started raining here sometime early this morning.Not much, just enough to get things wet.  I've gotten to fly the Twister a little.  Just about have it trimmed out.  Just a couple more things to play with.  I've got all the down thrust out of it now and need to fly it again to see if my guessesare right.  A little more incidence and it should be perfect.  It's so close now, that it's going to take a bit of flying to reallytest it out.  We've been having a bit too much wind for trimming.  Man, you add lead and I get out the grinder!  LOL  Actually, I'm pretty happy with how this plane turned out.  I'm under by a few ounces and could get more out of it if I need to. Rex



From: jnhiller at earthlink.netTo: nsrca-discussion at lists.nsrca.orgDate: Thu, 2 Oct 2008 09:09:13 -0700Subject: Re: [NSRCA-discussion] Test

Hi Rex. Works here. Aren't you working? We had good flying yesterday. Looks like rain showers for the next few days. I haven't dumb thumbed out of the box yet trying to master the new masters sequence yet. Put some mixing into the #4 airplane and it is working better. I also added a half-pound of lead to bring it up to 9 pounds. The only noticeable trim change was about a half turn on the wing adjusters.  Will put an OS in the #2 airplane and is getting back into to practicing.
Catch you later.
Jim
 
-----Original Message-----From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of RexSent: Thursday, October 02, 2008 8:43 AMTo: NSRCA-discussionSubject: [NSRCA-discussion] Test
 
Testing, 1, 2, 3.... Rex

Get more out of the Web. Learn 10 hidden secrets of Windows Live. Learn Now 

Stay up to date on your PC, the Web, and your mobile phone with Windows Live. See Now 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20081003/5ee3e1a9/attachment.html>