[NSRCA-discussion] Fuel soaked wood repair

[Jay Marshall]

Saw some K2 AT Ace Hardware last month. Google it.

 

Jay Marshall 

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of MKMSG
Sent: Monday, November 10, 2008 10:23 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] Fuel soaked wood repair

 

John:  Don't know if they still sell it, but K2R spot remover worked great
when I used it years ago.  Put it on, let it dry, and vacuum it off.  A
couple of applications might be needed, but it did work.

 

Mike 

----- Original Message ----- 

From: John Pavlick <mailto:jpavlick at idseng.com>  

To: NSRCA Discussion <mailto:nsrca-discussion at lists.nsrca.org>  

Sent: Monday, November 10, 2008 9:10 PM

Subject: [NSRCA-discussion] Fuel soaked wood repair

 

I'm trying to repair one of my friend's airplanes (broken landing gear
plate) and unfortunately it's pretty well soaked with fuel in the tank area.
I've never had much luck trying to get fuel out of wood other than soaking
it with CA. Is there anything I can do or is it hopeless?

 

John Pavlick
http://www.idseng.com


  _____  


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20081111/0d6a3e12/attachment.html>