[NSRCA-discussion] Fuel soaked wood repair

[MKMSG]

John:  Don't know if they still sell it, but K2R spot remover worked great when I used it years ago.  Put it on, let it dry, and vacuum it off.  A couple of applications might be needed, but it did work.

Mike 
  ----- Original Message ----- 
  From: John Pavlick 
  To: NSRCA Discussion 
  Sent: Monday, November 10, 2008 9:10 PM
  Subject: [NSRCA-discussion] Fuel soaked wood repair


  I'm trying to repair one of my friend's airplanes (broken landing gear plate) and unfortunately it's pretty well soaked with fuel in the tank area. I've never had much luck trying to get fuel out of wood other than soaking it with CA. Is there anything I can do or is it hopeless?

  John Pavlick
  http://www.idseng.com


------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20081111/4463ec8d/attachment.html>