[NSRCA-discussion] Desperate

Archie Stafford astafford at swtexas.net
Wed May 28 16:35:31 AKDT 2008


John,

 

Check the backplate bolts.  I had similar symptoms and it was raw fuel
coming out of the backplate.  The motor still runs fine because it doesn't
depend on pressure for fuel delivery.  Check all 4 of the bolts on the
backplate,

 

Arch

 

 

  _____  

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of John Konneker
Sent: Wednesday, May 28, 2008 7:22 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] Desperate

 

Jason,
I'll try to track that down.  It seems that it's confined to the exhaust
side.  Very clear residue.  Exhaust...?  Raw fuel..?
Man I just don't know...
JLK

  _____  

From: jshulman at cfl.rr.com
To: nsrca-discussion at lists.nsrca.org
Date: Wed, 28 May 2008 20:11:43 -0400
Subject: Re: [NSRCA-discussion] Desperate

What about the o-rings around the valves

 

Regards,
Jason
www.jasonshulman.com
www.shulmanaviation.com
www.composite-arf.com 

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of John Konneker
Sent: Wednesday, May 28, 2008 8:04 PM
To: Discussion List
Subject: [NSRCA-discussion] Desperate

I have a bad fuel/exhaust leak on my YS 1.60.  It started just before my NMP
header split but continued after replacing with 
a Hatori header and 821 muffler.  I'm getting pretty desperate trying to
find it.  I have replaced all the fuel lines.  I have snugged up 
the flange that screws in to the head.  I have retightened the header
flange.  I have checked the valve cover gasket.  I have checked 
the head bolts but it still leaks.  I consider the leak bad enough that if I
don't get it fixed by tomorrow I will have to miss my second contest in a
row because of it.  It really soaks the inside of the engine compartment on
the left (exhause) side.  Bad enough that when I run my finger down the
firewall it is wet with oil.  The engine mount beams on the bottom sides are
almost dripping.  
Any thoughts?
Thanks!
JLK
 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080529/fd112c0a/attachment.html 


More information about the NSRCA-discussion mailing list