[NSRCA-discussion] Rudder servo wheel part 2

[chris moon]

My new Jason style- straight cable - servo wheel rudder setup is in my
new "secret project" and has not flown yet.  Maybe another week or
so....... :)



Chris



John Konneker wrote:

  So....Chris...

Let's see if I understand this...

Jason runs a wheel on his rudder servo and straight cables and he won
FAI at the Nats.

Since you have been running a wheel on your rudder servo with straight
cables you are winning Master's class in the contests you fly.

Does anyone else see the correlation?

Where do I get one of these rudder servo wheels?

Hmmmmmm?????

JLK

  
  

From: cjm767driver at hotmail.com

To: nsrca-discussion at lists.nsrca.org

Date: Tue, 20 May 2008 17:44:17 -0500

Subject: [NSRCA-discussion] Rudder servo wheel part 2

  

  
  
I have the rudder servo setup now with the Hangar 9 servo wheel. The 

cables from the servo to the rudder are not crossed and run straight 

back. My question is that it would seem that crossing the cables would 

actually be a good idea when using a wheel since that would increase
the 

angle that the cable meets the wheel and make it less likely for the 

cable to get derailed. Does anyone who is using a wheel have any 

input? Should I just leave them straight or cross them? By the way, 

the cables are not inside any tubes and would be rubbing together if I 

crossed them.

  

Thanks

  

Chris

  

  

  

  
  
  

Make every e-mail and IM count. Join the i’m Initiative from Microsoft. 

  
  

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


_________________________________________________________________
Make every e-mail and IM count. Join the i’m Initiative from Microsoft.
http://im.live.com/Messenger/IM/Join/Default.aspx?source=EML_WL_ MakeCount
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080521/70d84210/attachment.html