[NSRCA-discussion] Rudder servo wheel part 2

[chris moon]

I have the rudder servo setup now with the Hangar 9 servo wheel.  The 
cables from the servo to the rudder are not crossed and run straight 
back.  My question is that it would seem that crossing the cables would 
actually be a good idea when using a wheel since that would increase the 
angle that the cable meets the wheel and make it less likely for the 
cable to get derailed.  Does anyone who is using a wheel have any 
input?  Should I just leave them straight or cross them?  By the way, 
the cables are not inside any tubes and would be rubbing together if I 
crossed them.

Thanks

Chris


_________________________________________________________________
Make every e-mail and IM count. Join the i’m Initiative from Microsoft.
http://im.live.com/Messenger/IM/Join/Default.aspx?source=EML_WL_ MakeCount
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080520/24628a3a/attachment.html