[NSRCA-discussion] Axi 5330/F3a, Jeti 90 settings

[Ken Thompson]

And much, much more...
----- Original Message ----- 
From: "Ron Van Putte" <vanputte at cox.net>
To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
Sent: Monday, May 12, 2008 8:39 PM
Subject: Re: [NSRCA-discussion] Axi 5330/F3a, Jeti 90 settings


> Now that's what the NSRCA Discussion List is all about!
> 
> Ron VP
> 
> On May 12, 2008, at 8:13 PM, AtwoodDon at aol.com wrote:
> 
>> Accu Type =  Li-XX
>> Brake = Off
>> Cut off voltage = High
>> Timing = High Outrunner
>> Cut off type = Slow down
>> Throttle Curve = Linear
>>
>> Don Atwood
>>
>> In a message dated 5/12/2008 5:54:39 P.M. Pacific Daylight Time,  
>> rctechnics at yahoo.com writes:
>> Please can some one tell me what settings they are using on there  
>> Axi 5330/F3a and Jeti 90 ESC.  I have a the Advance plus Prog-Card.
>>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion