[NSRCA-discussion] Rudder pull-pull

[BUDDYonRC at aol.com]

Chris 
In my example a large diameter servo wheel is used with new connection  
points drilled on a center line approx. 1/4" toward the rudder from the  centerline 
of the servo shaft.
the 1/4" distance must be adjusted to fit the geometry which will  provide 
equal tension at all positions. On my Impact the distance is 1/4".
Buddy 



**************Wondering what's for Dinner Tonight? Get new twists on family 
favorites at AOL Food.      
(http://food.aol.com/dinner-tonight?NCID=aolfod00030000000001)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080509/a99cb1f0/attachment.html