[NSRCA-discussion] Embarrassing Programming Problem

[george w. kennie]

Maybe it's different on the 9Z, but on my radio it's 2 & 8. If you're using 
2 & 6, how are you getting flaperon?


----- Original Message ----- 
From: "Ron Van Putte" <vanputte at cox.net>
To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
Sent: Monday, May 05, 2008 4:08 PM
Subject: [NSRCA-discussion] Embarrassing Programming Problem


> I'm setting up a new airplane on my Futaba 9ZAP transmitter and using
> channels 2 and 6 for servos on each elevator half.  I have PMX set
> for channels 2 and 6, mixing channel 2 into channel 6 and everything
> works fine, except the servo on channel 6 only moves about 2/3 the
> throw of the servo on channel 2.  I've tried everything I can think
> of to rectify the problem with no success.  In addition, there's a
> small shift in neutral when going from high rate elevator to low rate.
>
> I started with an unused model in the menu, so I don't think there's
> any hidden programming lurking.
>
> Any ideas?  I'll be very irritated to find there's a simple solution,
> but I'd also be very grateful to have the problem go away.
>
> Ron Van Putte
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> 


-- 
I am using the free version of SPAMfighter for private users.
It has removed 7139 spam emails to date.
Paying users do not have this message in their emails.
Get the free SPAMfighter here: http://www.spamfighter.com/len