[NSRCA-discussion] 14MZ spring replacement procedure

[Dave Reaville]

That's good advice Adrian, much appreciated.
 
Are you going to Muncie this year? If so can you throw one of those fancy plane covers in your suitcase?  If not maybe send it with one of the D-7 entourage and I'll square up with you later..... like at the Worlds in 2009 :-)   
 
Dave

----- Original Message -----
From: adriancwong at earthlink.net
Date: Sunday, June 29, 2008 8:21 pm
Subject: Re: [NSRCA-discussion] 14MZ spring replacement procedure
To: General pattern discussion <nsrca-discussion at lists.nsrca.org>


Dave,


Becareful not to crank those stiffer spring's tension too high, it has known to cause damage to the encoders, it happened to one of my 14MZ.

Adrian



-----Original Message----- 
From: Dave Reaville 
Sent: Jun 29, 2008 6:30 PM 
To: NSRCA 
Subject: [NSRCA-discussion] 14MZ spring replacement procedure 


Hi folks
 
For those interested I have added my exploits on 14MZ spring replacement to the Pattern West website. You can go to the page at this link http://members.shaw.ca/patternwestnews/eventinfo/14mzsprings.htm
 
Although I didn't have complete success (don't think I had the correct springs) it was a good experience.
 
Thanks, 
 
Dave 

NSRCA I-VP
Canada District
NSRCA 3156
MAAC 56510 
http://members.shaw.ca/patternwestnews/
http://f3acanada.org/ 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080630/6dfe8a90/attachment.html>